I’m using this pattern here … and it’s much easier than I thought it would be. Labyrinthos is a website I found very helpful in figuring out how to do this project.
Month: July 2012
to press (a thing) into or on something.
to produce (a mark, figure, etc.) by pressure; stamp; imprint:
to apply with pressure, so as to leave a mark.
I love art journals. Or, rather, I love the idea of art journals. I’ve never been able to keep one. I get a few pages in and mess up a page or look back and want to change things around. But I need a place to put sketches and ideas … So, this is a flexible art journal that can be added to and changed at any time.
The covers of this journal are made of 1/8 inch thick, double sided masonite. I like this as a foundation for small paintings and it’s thin enough to work for covers, about the same thickness as book board and very smooth and sturdy. I’ve cut two pieces of this to approximately 5 x 7 in and drilled three holes in both to fit rings.
I covered most of the masonite with a thin coat of light modeling paste. This will hold impressions made with stamps or anything else. The depth of the stamp will determine how thick the modeling paste should be.
After letting this dry for about fifteen minutes or so, until it was just starting to harden on the surface, I used rubber and metal stamps dipped in water to stamp into the paste. Here, I’ve made this a quite subtle effect. But any stamp or any size can be used and thicker or thinner layers of paste.
Once dry, I sanded the impressed modeling paste and painted a few thin washes of magenta and turquoise, masking off the stripes with tape.
On a small, stretched canvas, the effect is more obvious because I’ve used larger stamps and a thicker layer of paste. The technique is the same … I used a palette knife to put on a thin coat of modeling paste (which will also act as a resist), allowed it to dry for fifteen minutes or so, then used stamps dipped in water.